sales@yibo-plastics.com (852) 2688 5107 13268184248
EN | JP | 繁 | 简
Get Quote

Business Scope

Business Scope

Polyplastics

Polyplastics (DAICEL Group)
  • POM DURACON®
  • LCP LAPEROS®
  • PPS DURAFIDE®
  • PBT DURANEX®
  • COC TOPAS®
  • PEK SARPEK ®
  • LFT PLASTRON®

POM Acetal Co-polymer

One of the most favourable balance of properties

DURACON is a representative type of copolymer, and it plays an active role in applications centered on mechanical components such as gears, screws, and bearings.

Characteristics:
  • Superior creep resistance
  • Exceptional fatigue resistance
  • Exceptional friction and wear properties
  • Water absorption is minimal

LCP Liquid Crystal Polymer

A state-of-the art material allowing thinner-walled molding with higher plasticity/flowability

As an engineering plastic that transcends the common wisdom of traditional engineering plastic and approaches steel, LAPEROS can be said to the epitome of next-generation advanced engineering plastics.

Characteristics:
  • The thinner the product, the higher the proportion of the oriented surface layer, so greater strength and elastic modulus can be achieved the thinner the product.
  • Because of its microcrystalline structure, LCP possesses superior deflection temperature under load (180-260°C), continuous usage temperature (200-240°C), and solder heat resistance (260°C for over 10s, 310°C for 10s), despite its relatively low melting point.

PPS Polyphenylene Sulfide

Remarkable toughness available in combination with higher rigidity

DURAFIDE completely changed the industry's prior view of polyphenylene sulfide (PPS) as being a brittle material. DURAFIDE is firmly establishing is base as a new type of PPS resin that overcomes this brittleness.

Characteristics:
  • Mechanical strength is exceedingly high
  • Elongation and impact strength are high
  • Can withstand immersion is 260°C solder bath for 10s
  • Ionic impurities are low

PBT Polybutylene Terephthalate

Excellent processing characteristics in combination with superior and electrical insulating properties

DURANEX is adopted in a wide variety of familiar products used in very day life, especially electrical components.

Characteristics:
  • Strong characteristics against brittleness
  • UL-certified slow burning (94HB) and self-extinguishing grades (94V-0, V-2) exists, and electrical properties exhibited are the highest of any thermoplastic
  • Lower water absorption is exhibited
  • The surface of molded products is smooth

VICTREX

VICTREX
  • PEEK VICTREX™
  • PEEK Film APTIV™

VICTREX PEEK Polymer

PEEK is a partially crystalline thermoplastic polymer. It is a member of a broader class of polymers often referred to as polyaryl ether ketones (PAEK).

PEEK Polymers are the best materials for electronics industry.

Excellent properties in:
  • High temperature performance
  • Fatigue performance
  • Wear resistance
  • Chemical resistance
  • Inherent purity
  • Ease of processing
  • Stability of dimension
  • Ease of processing

VICTREX PEEK-HT

PEEK-HT polymer is the unique high performance material developed for applications that demand superior higher temperature resistance than standard PEEK polymer.

With a glass transition temperature of 157°C (315°F) and a melting temperature of 374°C (705°F), PEEK-HT delivers extended high temperature performance, while offering all the key characteristics of natural PEEK, including toughness, strength and chemical resistance.

Key Features of PEEK-HT:
  • Superior high temperature performance
  • Improved compressive strength
  • Exceptional resistance to chemicals, solvents and fuels
  • Inherent low flammability, low smoke emission
  • Good electrical properties
  • Outstanding hydrolysis resistance
  • Consistent ease of processing

APTIV-HT Film

APTIV-HT films offer a unique combination of properties, providing an unrivaled material solution for engineers and designers for use in high performance applications.

It is the most versatile and high performing thermoplastic film available and has a proven track record of success in demanding applications in a broad range of industries and markets including electronic, acoustics, aerospace, automotive, industrial, oil and gas, chemical processing and many more.

APTIV-HT film high performance features include:
  • High heat resistance
  • Excellent wear properties
  • Low moisture absorption
  • Broad chemical resistance
  • High strength and toughness
  • Electrical stability with stable dielectric properties
  • FDA Food Contact and Dairy 3A certified

Cinowin

Cinowin
  • HPPA VINTIC ®
  • PA APPLON®
  • PC PARCATE®

Cinowin Specialty Nylon

Cinowin Specialty Nylon Product Features

High Temp Nylon Vintic®

Vintic 800 Series (Tm 315°C, Tg 125°C)
Vintic 600 Series (Tm 325°C, Tg 135°C)
  • Good mechanical properties, high stiffness, low creep
  • Very low water absorption, good dimensional stability, stable physical/electrical properties
  • High heat resistance, UL V0 flame retardant, suitable for reflow soldering (SMT)
  • CTI 600V, high resistivity, breakdown voltage 40kV, good insulation
  • Resistant to hydrolysis, alcoholysis, coolants, hydraulic fluids, etc.
  • Good flowability, easy to color, easy to process

High Performance Nylon Applon®

Applon 9000 Series
Applon 7000 Series
  • Good mechanical properties, high strength, high stiffness, good toughness
  • Resistant to corrosion, weak acids/alkalis, engine oil, hydraulic fluid
  • Flame retardant V0, CTI 600V
  • Wear resistant, self-lubricating
  • High/Low temp resistance, color stable
  • Good performance in humid/hot environments, no precipitation
  • Good flowability, easy to dye and process
  • Metal replacement, suitable for insert molding with metal

Yibo Ningbo Compounding

YIBO Ningbo compounding
  • PEEK - GF Filled, CF Filled, Wear Resistant, ESD Grades
  • PA - GF Reinforced, Flame Retardant, Friction & Wear Resistant, Impact Resistant

Yibo Ningbo Specialty Materials

Professional Compounding PEEK & PA Series

PEEK Specialty Material Series
No. PEEK PEK PEKK PAEK Blend Formulation Type App.
1 PEEK PEK PEKK PAEK Blend
2 Y2000
Y3000
Y4000 		Y2400
Y3400
Y4400 		Y2100
Y3100
Y4100 		Y2300
Y3300
Y4300 		Pure Resin Inj, Ext
3 Y2010 Y4310 GF Filled Inj, Ext
4 Y2020
Y4021 		Y4321 CF Filled
5 Y2041
Y3041 		Y2140
Y2141 		Y2340
Y2341 		Wear Resistant Inj
6 Y3031
Y3032 		ESD Grade Inj, Ext

Application Examples: CMP Retaining Ring (PEEK), Wafer Carrier, FOUPs (PEEK Blend Surface Antistatic/ESD)

Yibo Ningbo Compounding PA Product Series
Series Comp. Grade Desc.
Flame Retardant PA66 A3F V0, Non-Halogen
A3XF V0, Non-Halogen, Red
A3WF V0, Halogen
GF Reinforced, PA6 B3XFG3/B3XFG6 V0, Non-Halogen, 15%/30% GF
B3WFG3/B3WFG4/B3WFG6 V0, Non-Halogen, 15%/20%/30% GF
A3WFG3/A3WFG6 V0, Halogen, 15%/30% GF (PA66)
Pure Resin PA6 1011B/1013B/1015B Rapid Molding/Standard/Toughness Modified
PA66 A28S/A30S High Flow/Medium Flow, High Temp
Fiber Reinforced GF Reinforced, PA6 B3G3 - B3G10 15% - 50% High Flow GF
GB Reinforced, PA6 B3GB6/B3GB8 GF + Bead Mix, Low Warpage, High Strength
GF Reinforced, PA66 A3G3 - A3G10 15% - 50% High Flow/High Temp/High Stiffness
GB Reinforced, PA66 A3GB6/A3GB8 GF + Bead, Low Warpage, High Strength
Functional Series PA6/PA66 B3N/A3N/B3L/A3L etc. Friction/Wear Resistant, High Impact, Low Temp